The MISE Kit

The MISE is now available in kit form, in very limited quantity, for those who wish to build their own and save some money in the process. See the pricing page for information on ordering your kit.

Some components, such as the power supply size and plug orientation, and the compact flash card brand and size, may vary from these photographs.

The kit comes with:

• MISE 1.1 PCB
• FPGA module, preprogrammed and tested
• Ethernet module, tested
• Power supply, tested
• Ribbon cable assembly for attaching the MISE to the TRS-80, assembled and tested
• Compact Flash card (2GB or larger) and dual IDE/CF adapter, programmed and tested
• The various components and connectors required to build and use the MISE

Note: Due to postal regulations, MISE kits ship without the CR2032 battery needed to maintain the real-time clock/calendar during powerdown. You'll have to obtain one of these elsewhere.

Note: The crystal for the real-time clock is very small; it is shipped wrapped in a small piece of drafting tape to prevent it from being overlooked.

To assemble the MISE kit you'll need solder, a soldering iron, and an anti-static wrist strap.

Use this Bill Of Materials for component placement information.

Complete or partial kit returns will be accepted for 14 days following delivery, but only in cases of components that are defective or have been damaged during delivery. Partially or completely customer-assembled circuit boards will not be accepted for return.

Send me email before returning any parts. Packages received without prior agreement will be refused.

Back to the main page